The side panel comes off by removing two thumb screws. The power wire for the 250mm fan is plenty long.
The first thing we find inside is a disclosure of the limited warranty on the case.
Next a box filled with accessories. Included is a bag of screws with motherboard stand-offs and padded washers, and also a set of instructions.
Two sets of tool-free locking clips are included for installing hard drives in the designated spots above the PSU (seen on the next page).
Three sets of brackets are included for mounting 3.5" devices inside of the 5.25" bay. These can be used for hard drives, floppy drives, fan controllers, etc.
Lastly, 5 sets of tool-free "button" lock design clips for 5.25" devices are included. Simply slide the drive in the bay, line up the holes, push on the clip and turn the knob to the locked position.
I only found one flaw on the case, which is very easily fixable (the bent edge). There are no scratches in the side panel window or in the paint.