Kingwin Z1 Series SATA Hard Drive Enclosure
Author: Shawn Knight
Editor: Frank Stroupe
Date: 11-16-2007
Provided by: Kingwin
Discuss: View Comments
Pages:
Installation



Installing a hard drive in the Z1 enclosure is very easy. On the back bezel, there are two screws that need to be removed. Kingwin thoughtfully included a Phillips screwdriver for this. Once you have removed the bezel, simply push the internals out towards the front of the enclosure.



Connect the power and SATA cables to your hard drive, then simply lay it down in the enclosure and use the included screws to secure it. Now, slide the internals back into the enclosure, reattach the rear bezel and you're all set.

Next up, usage and conclusion...


  Sponsors Links

  Sponsors Links