NZXT Precise PRC-650W Power Supply
Author: Zahn Funk
Editor: Shawn Knight
Date: 10-05-2006
Provided by: NZXT
Pages:
Cables

The main ATX cable is roughly two feet long and sleeved. The connector is a 20+4 layout, so the extra four wire section can be removed for use on older 20 pin motherboards.



There are 2 PCIe cables, which have been sleeved in shielded braid with plastic coating. This is the feature NZXT calls REMI and is designed to provide filtered current specifically for graphics cards to eliminate interference.



There are three lengths of cable, each with both a 4 pin and 3 pin connector for attaching fans. The ECASO feature will run these fans at a reduced voltage for a period of time after the system is shut off to bring components to ambient temperature.



The secondary +12v connector is a 4+4 design, which can be split for connection to most 4 pin motherboard headers.



Two lengths of SATA cables provide up to 4 connectors for SATA drives.



The final two cables have standard 4 pin molex and floppy connectors, each cable containing 3 and 1 respectively.



All of the cables should be of sufficient length even for use in full tower cases.



Next up, performance and conclusion.


  Sponsors Links

  Sponsors Links