As you can see, the interior of the 932P is very spacious. Two removable hard drive bays sit at the front of the case and are held in place by three screws each.
The left side of the case gives us a better look at the 80mm blowhole. As mentioned earlier, you could easily remove the filter and install an 80mm fan here to help cool your video card.
Here we have a closer look at the rear of the 932P. The two included 80mm fans use 4-pin pass-through Molex adapters. There are seven expansion slots, but only six are usable (the bottom slot is reserved for the LCD screen's VGA cable. The slot covers are reusable and held in place with standard Phillips screws.
Finally we have the right side. Here we get a better look at the power supply air vent and the right side hard drive rack.
Next up, hardware installation...