Both sides of the 932P have the same overall design, with the only difference being the blowhole size/location. The left side has two 80mm holes. The one closer to the front of the case has an 80mm fan behind it which is used to cool hard drive(s) installed within. The second fan hole is simply an exhaust vent, but you could easily add an 80mm fan for increased airflow. The front fan hole on the right side is also used to cool hard drive(s) (fan included). The second fan hole is larger and positioned near the rear of the case. This hole is used to allow the power supply to breathe freely.



The back of the case has a full size PSU port, two 80mm exhaust fans and your standard array of PCI slots. No I/O shield is included, which is a good thing. The VGA cable you see is for the front LCD screen. The top of the case has two vented air ports directly over the CPU/video card area.

Move ahead as we take a look at the interior of the MonCaso 932P...