There are four small screws on the underside of the Icy Box that need to be removed to get inside the device. You will need a very small screwdriver here.
Once inside, you can see that there really isn't much room inside the enclosure; just enough to hold a 2.5" hard drive.
I will be using a 160 GB Western Digital SATA drive in the Icy Box. The drive is very easy to install. Simply slide it down into place and push it back to ensure a solid connection at the rear. Now, replace the Icy Box's back cover and secure it back with the four screws.
Continue ahead as we put the Icy Bay to the test...