The main ATX cable is roughly two feet long. The connector is a 20+4 layout, however the clip that normally holds the two sections together was broken on my unit as delivered. Once inserted into the motherboard it did not create any problems.



The auxiliary +12 is a 4+4 setup that has become common to support both the latest AMD and Intel boards. The clip mechanism that holds these connectors together is intact.



Two PCIe cables are provided to support SLI configurations.



SATA connectors come two per cable and are spaced sufficiently apart to reach multiple drives even if they aren't immediately next to each other.



The final two cables have standard 4 pin molex and floppy connectors, each cable containing four and one respectively.



Next up, lighting.